How to remove the ceiling lamp？

1. Removal procedure of round ceiling lamp
First cut off the power supply of the lamp, so as to ensure the safety of our disassembly. Then slowly remove the screws around the lamp cover with a screwdriver, and finally remove the bulb.

2. Disassembly steps of embedded ceiling lamp
At first glance, the embedded ceiling lamp is very complicated and can hardly be removed. However, after careful inspection, we can find that the embedded ceiling lamp is usually clamped on it with something, so we can find a safety clip beside the lamp, which can be disassembled after removal.

3. Disassembly steps of aluminum gusset plate ceiling lamp
First, cut off the power supply, use a screwdriver, thin blade, etc. to turn up a small corner on the seam of the aluminum gusset plate, take down the lampshade, then the aluminum gusset plate can be removed by the same operation, and finally take out the bulb.

4. Removal steps of rectangular ceiling lamp
The disassembly steps of the rectangular ceiling lamp are more complicated than those of the round ceiling lamp, which are essentially the same.
First cut off the power supply, and then take down the lampshade. For the rectangular lampshade, we should start from its four corners, use the washing hook of the glass suction tray to absorb the aluminum alloy part on the side, and then slowly pull down until the lampshade is taken down. Finally, we can take down the bulb.

It is very important to cut off the power supply before the demolition construction, which can ensure the safety of our construction and reduce the occurrence of construction accidents.